USB 3.0 to SATA III Adapter for 2.5" 3.5" SDD HDD Hard Drives with 12V/2A Power

Description

Descriptions
This USB 3.0 to SATA adapter cable lets you connect a 2.5in/3.5in SATA hard drive or solid state drive to your computer through an available USB 3  port. The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
This portable, cable-style adapter makes it easy to swap between hard drives without having to install your drives in an enclosure, and features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
Applications
Take advantage of USB 3.0-enabled laptops or desktops with UASP for faster transfer speeds
Create an external storage solution on the go, for desktops, laptops or Ultrabook™ computers
Access any 2.5″/3.5″ hard drive or solid state drive from any USB enabled computer, for data migration or drive cloning
Back up important data to an external storage device
Retrieve data from an old SATA drive
Use with an SSD drive to externally upgrade your laptop hard drive via USB 3.0
Hardware Specs:
Bus Type: USB 3.0 Compatible with USB 2.0 and USB 1.0
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in/3.5in
Fan(s): No
Interface: USB 3.0
Performance
Max Drive Capacity: Currently tested with up to 2TB 5900 RPM hard drives
Type and Rate: USB 3.0 – 5 Gbit/s  | SATA III (6 Gbps)
UASP Support: Yes
Connector(s):
Drive Connectors 1 – SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 – USB 3.0 A (9 pin; SuperSpeed) Male
Software/OS Compatibility: Windows XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8/8.1 (32/64-bit)
Mac OS X, Linux
Special Notes / Requirements
Note – Cable will work only with 2.5″ & 3.5″ SATA drives;
Physical Characteristics:
Product Height 0.5 in
Product Length 17 in
Product Width 1.9 in [49 mm]
Environmental
Humidity 40%-85%RH
Operating Temperature: 0°C to 60°C (32°F to 140°F)
Storage Temperature: -10°C to 70°C (14°F to 158°F)
Includes
1 – USB 3.0 to SATA Adapter Cable
1 x 12V/2A Power Adapter